Axial fans

layer

AXN-KSE 12/56

  • Suitable in horizontal and vertical style.
  • Increase in pressure coefficients due to optimised outlet guide vanes.
  • The impeller blades can be steplessly adjusted without any need to disassemble the impeller. This adjustment option allows the user to make extensive adjustments to the relevant operating point, as well as subsequent motor rating corrections.
  • High pressure coefficients enable low circumferential speeds and therefore low-noise operation
  • Compact size enables installation even when space is tight
  • M-D style – with direct drive, with motor in outlet. Impeller assembled directly on the motor shaft
  • Upon request for higher pressures, or emergency mode / redundancy even possible in two-stage ZAXN-KSE 12/56 series
  • Efficiency up to 89%
  • Casing available in all RAL colours
  • 12 sizes
  • Impeller’s nominal Ø 400 to 1,600 mm
  • Volume flow rate V. max. 400,000 m3/h
  • Total pressure increase pt max. 2,600 Pa

read more

layer

ZAXN 6_9_12 / 56

Based on two fans connected in series, suitable for underground car park extract air (66% redundancy in emergency mode)

  • Suitable in horizontal and vertical style.
  • The desired operating point is achieved with the best efficiency due to the optional number of blades (6 / 9 / 12).
  • Optimised outlet guide vanes for increasing the pressure coefficients, so low-noise operation due to low circumferential speed
  • Extensive adjustments to the relevant operating point and subsequent motor rating corrections can be made by steplessly adjusting the impeller blades without any need to disassemble the impeller
  • The total pressure increase is double that of single fans.
  • Casing available in all RAL colours
  • 15 sizes
  • Impeller’s nominal diameter 315 to 1,600 mm
  • Volume flow rate 400,000 m3/h max.
  • Total pressure increase max. 4,500 Pa

read more

layer

AXO

Impellers with a different number of blades are used (5, 6, 8, 9, 10 or 12) depending on the size and the desired output; please specify when ordering. Compact size enables installation even when space is tight.

  • M-D style: air direction with motor in outlet, with direct drive.
  • Suitable in horizontal and vertical style.
  • Casing available in all RAL colours
  • Also available with acoustic insulation.
  • Efficiency up to 68%
  • 10 sizes
  • Impeller’s nominal Ø 315 to 1,600 mm
  • Volume flow rate V max. 250,000 m3/h
  • Total pressure increase pt max. 1,800 Pa
  • M style with direct drive. Impeller assembled directly on the motor shaft
  • Motors can come with thermal contacts or a PTC thermistor

read more

layer

GLDF

This series has the highest fan efficiency and therefore the lowest electricity consumption out of all the fans in its performance class. It is over 50% more efficient than normal round duct fans. Roughly 70% to 90% of a fan’s

total costs can be attributed to electricity costs. These costs are cut by more than 30% with GLDF fans! What’s more, the GLDF series is surprisingly affordable despite its good product properties. Its extraordinary performance data, and particularly its high fan efficiency, are due to the profiled blade shape and the continuous meridian channel. This results in very low-loss energy conversion in the fan

  • 10 sizes
  • Volume flow rate V max. approx. 20,000 m3/h
  • The sizes 560, 630 and 710 can also be operated directly on the 400 V / 50 Hz three-phase supply

read more

layer

AXO 10/50

Impellers with different blade pitch angles are used depending on the size and the desired output; please specify when ordering. Compact size enables installation even when space is tight. Motors with thermal contacts or a PTC thermistor upon request

  • Suitable in horizontal and vertical style.
  • Casing available in all RAL colours
  • Also available with acoustic insulation.
  • Efficiency up to 63%
  • 15 sizes
  • Impeller’s nominal Ø 315 to 1,600 mm
  • Volume flow rate V. max. 200,000 m3/h
  • Total pressure increase pt max. 1,600 Pa
  • M style – with direct drive. Impeller assembled directly on the motor shaft.

read more

layer

AXN 6_9_12/56

  • Extensive adjustments to the relevant operating point and subsequent motor rating corrections can be made by steplessly adjusting the impeller blades without any need to disassemble the impeller
  • Optimised outlet guide vanes to increase the pressure coefficients.
  • Low-noise operation due to low circumferential speeds caused by high pressure coefficients.
  • 21 sizes
  • Impeller’s nominal Ø 250 to 2,500 mm
  • Volume flow rate V. max. 400,000 m3/h
  • Total pressure increase pt max. 2,600 Pa
  • M-D style: air direction with motor in outlet, with direct drive. Impeller assembled directly on the motor shaft
  • Can be installed horizontally and vertically in the building and outdoors.
  • Corrosion protection category up to C5M possible
  • Casing available in all RAL colours

read more

layer

AXO 9/27

Different blade pitch angles are used depending on the size and the desired output; please specify when ordering. Compact size enables installation even when space is tight. Motors can come with thermal contacts or a PTC thermistor

  • Suitable in horizontal and vertical style.
  • Effect-optimised steel impeller, efficiency up to 74%
  • Casing available in all RAL colours
  • Also available with acoustic insulation.
  • 15 sizes
  • Impeller’s nominal Ø 315 to 1,600 mm
  • Volume flow rate V. max. 200,000 m3/h
  • Total pressure increase pt max. 1,000 Pa
  • M-D style: air direction with motor in outlet, impeller assembled directly on the motor shaft.
  • Conveying temperatures of up to +130°C possible with special motors (upon request)

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +49 (0)6621 / 950-0 | Fax: +49 (0)6621 / 950-100

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)6621 / 950-0 | Fax: +49 (0)6621 / 950-100

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +49 (0)6621 / 950-0 | Fax: +49 (0)6621 / 950-100

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)6621 / 950-0 | Fax: +49 (0)6621 / 950-100